Call us: +55 11 5511-9001
MIXER HEATER TM-07 Details

The TM07 Mixer / Heater's main purpose is to mix, heat and homogenize resin or gel-coat, making applications easier whatever the operation is: manual fiberglass lamination, spray-up, RTM (resin transfer molding), presto vacuum assisted molding, gel-coating etc., due to a more stable temperature of the materials.

It can also be used to mix mineral calcium carbonate to gel-coat or resin. Due to its conception, it is easy to use and requires little maintenance.


CHARACTERISTICS

Steel tank with capacity of 300 Kg of material. Great interior / exterior finish in polyester-base, powder, electrostatic paint.

Slanted bottom equipped with a draining valve for easy emptying of materials.

Mixing axis with 2 metallic blades.

Activation by a three-phase worm-geared electric motor (reduction ratio 1:30) of 0.75 HP, 1,720 RPM, 220/380 VAC.

Control panel equipped with a protection key.

Digital temperature controller.

220 VAC, single-phase, disk coil, 1,000 W.

Pipe for pump assembly.


OPTIONAL ACCESSORIES
  • Pipe for pump assembly.
MIXER FOR MATERIAL DRUMS TM-08 Details

The TM-08 Mixer can be used for a myriad of applications: mixing mineral calcium carbonate to gel-coat or resin; dissolution and dispersion of pigments; mixing and homogenizing of chemicals.

Due to its simple conception, the TM-08 is extremely easy to operate.

Robust and of easy maintenance, it is ideal to eliminate problems obtaining homogeneous mixings, therefore avoiding waste of time and cutting labor costs.


CHARACTERISTICS

Steel-made, fixed-base structure. Great finish in electrostatic paint.

Pneumatic system of lifting the mixer through a self-centering lever.

Activation by a three-phase electric motor of 2 HP, 1,720 RPM, 220/380 VAC.

Galvanized mixing axis in SAE 1045 steel; length: 860 mm.

Galvanized, SAE 1045 steel blade Ø 140 mm.


OPTIONAL ACCESSORIES
  • 2-speed motor.

ADDITIONAL DATA
  • Working pressure: 50 lb/in².
  • Air consumption: 0.5 CFM (cubic feet per minute).
  • Dimensions (L x W x H): 930 x 950 x 1,850 mm.
MIXER HEATER TM07-6 Details

The TM07-6 Mixer / Heater's main purpose is to mix, heat and homogenize resin or gel-coat, making applications easier whatever the operation is: manual fiberglass lamination, spray-up, RTM (resin transfer molding), presto vacuum assisted molding, gel-coating etc., due to a more stable temperature of the materials.

It can also be used to mix mineral calcium carbonate to gel-coat or resin. Due to its conception, it is easy to use and requires little maintenance.


CHARACTERISTICS

Steel tank with capacity of 100 Kg of material. Great interior / exterior finish in polyester-base, powder, electrostatic paint.

Slanted bottom equipped with a draining valve for easy emptying of materials.

Mixing axis with 2 metallic blades.

Activation by a three-phase worm-geared electric motor (reduction ratio 1:30) of 0.75 HP, 1,720 RPM, 220/380 VAC.

Control panel equipped with a protection key.

Digital temperature controller.

220 VAC, single-phase, disk coil, 1,000 W.

Pipe for pump assembly.


OPTIONAL ACCESSORIES
  • Pipe for pump assembly.
MISTURADOR PNEUMÁTICO PARA BALDE DE 20L Detalhes

Este equipamento têm como objetivo realizar mistura de produtos e/ou materiais na área de pintura.


CARACTERÍSTICAS

Base com furação para fixação;

Estrutura com regulagem de altura;

Suporte do motor basculante para uma melhor utilização;

Regulagem de rotação, com trava de segurança.